Description

DS18B20 Waterproof Digital temperature sensor cable is very useful to measure temperature far away or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Since it is digital there wont be any signal degradation over long distances. Encapsulated waterproof high quality stainless steel tube is of anti-rust. These 1 wire digital temperature sensors are fairly precise and can give up to 12 bits of precision from the on-board digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the factory to differentiate them. It is used in agricultural equipment, audio equipment, automotive climate control, GPS Devices, Hard Disk Drive, Medical Equipment, Set-Top Boxes, Telecommunications

Cable specifications:

• Stainless steel tube 6mm diameter by 30mm long
• Cable is 36″ long and 4mm diameter
• Contains DS18B20 temperature sensor
• Sensor has three wires – Red connects to 3-5V, Blue/Black connects to ground and Yellow/White is data

Features:

• Usable temperature range: -55 to 125°C
• 9 to 12 bit selectable resolution
• Uses 1Wire interface requires only one digital pin for communication
• Unique 64 bit ID burned into chip
• Multiple sensors can share one pin
• ±0.5°C Accuracy from -10°C to +85°C
• Temperature limit alarm system
• Query time is less than 750ms
• Usable with 3.0V to 5.5V power/data